Olympus VT1621-01 manual 190, Appendix 5 Camera Error Messages

Appendix 5: Camera Error Messages (continued)

Viewfinder	Control	Monitor
	Panel

CARD FULL

(Card is full.

No space for

(No more storing more images can pictures.) *1 be stored

on the card.)

No display CARD FULL

No display		No display
No display	No display	PICTURE
		ERROR
No display	No display	CANNOT
		OPEN FILE

	Explanation
	Card is full and you
	cannot continue
	shooting.
During
Shooting	Folder numbering has
	reached 999, or file
	numbering has
	reached 9999, so you
	cannot continue
	shooting.
During	Card is full so you
	cannot continue
Print	selecting or cancelling
	pictures for printing.
Selection	(Selecting pictures for
	printing stores data on
	the card.)

Camera interior has overheated.

The selected picture cannot be displayed for playback, but be used for other processing.

Pictureshot withthiscamera	The selected
	picture cannot be
	displayed for
	playback, but be
	used for other
	processing.
Pictureshot withanother camera	The picture cannot
	camera.
	be displayed for
	playback with this

Solution

Replace the card with a fresh card, or delete images that you do not need, or transfer the images to a computer, and then delete all the images from the card.

Replace the card with a fresh card, or transfer the images to a computer, and then delete all the images from the card.

Replace the card with a fresh card, or delete images that you do not need, or transfer the images to a computer, and then delete all images from the card.

Switch the camera off and allow it to cool, and then switch the camera on again.

Remove the card, wipe clean the electrical contacts, insert the card and then try again. If the message is displayed again, the card can no longer be used.

You may be able to use the card again if you format it. However, formatting the card will erase all images stored on the card.

Select and display the picture on the camera used to take the picture.

*1

The sizes of the clusters are different on a SmartMedia and CompactFlash card, so you may not be able to store exactly the same number of images on either card. For this reason, you may not be able to copy all the images from a full card to the other card, even if it is completely empty. (You will see the CARD FULL message before copying is completed.) In this case, you should delete some images that you do not need, or for the target card use a higher capacity card.

190