Framing a picture with the monitor

1

2

OPEN

Eyepiece shutter

lever3

OPEN

4

5

6

1 Press the monitor button

.

2

 

You can see the same view in the monitor and the viewfinder. (However, framing pictures through the monitor consumes more battery power than when using the viewfinder.)

2 To prevent light from behind the camera entering the viewfinder, lower the eyepiece shutter lever.

3 Move the monitor lock/release button to the left (see illustration).

The upper part of the monitor projects

about 1cm (0.3 in.) from the camera.

4 If you need to raise the monitor, pull the bottom out.

5 Hold the camera as steady as possible.

Hold the camera carefully without blocking the lens, flash, or AF port with the camera strap, your fingers, etc.

6 Compose the picture in the monitor.

The picture that you take will be the same as the picture composed in the monitor. (The monitor displays 100% of the composed picture.)

You can also take a picture at Step 3 for a high-angle shot.

Cannot see through the monitor?

Make sure that you pressed the monitor button to activate the monitor display.

Make sure that the lens cap has been removed.

After the camera is left idle for a specified length of time, it will enter the sleep mode. Press the shutter button lightly to restore the camera to full operation.

Check the power switch. If the power switch is at the OFF position, move it to ON. If the power is off with the power switch in the ON position, the camera may have powered itself off. Move to OFF then move to ON again.

Mode dial set correctly? Make sure that the mode dial is set to P, A, S, or M.

Note

When framing a picture with the monitor, lower the eyepiece shutter lever. Light entering the viewfinder from behind the camera could wash out the picture with white light.

37

Page 39
Image 39
Olympus VT1621-01 manual Framing a picture with the monitor, Cannot see through the monitor?, Press the monitor button

VT1621-01 specifications

The Olympus VT1621-01 is an advanced and versatile portable test instrument designed especially for professionals in the fields of engineering and maintenance. This device stands out for its ability to perform various measurements and is widely regarded for its precision and reliability.

One of the main features of the VT1621-01 is its comprehensive measurement capabilities. It can effectively measure voltage, current, resistance, and frequency, making it a multifunctional tool for troubleshooting and diagnostics. Its versatility ensures it caters to a wide range of applications, including electrical installations and maintenance tasks in industrial settings. The ergonomic design contributes to ease of use, allowing users to handle the device comfortably even during prolonged periods.

Technology-wise, the VT1621-01 incorporates cutting-edge digital signal processing (DSP) to ensure rapid and accurate measurements. This results in stable readings, even in challenging environments where interference might be present. Additionally, the device supports auto-ranging, which simplifies the user experience by automatically adjusting measurement ranges based on the detected input, thereby enhancing reliability.

The display of the VT1621-01 is another highlight, featuring a large, high-resolution LCD that presents data clearly and is easy to read, even in dimly lit areas. Backlighting options further enhance visibility, ensuring that users can operate the device in various lighting conditions. Moreover, its intuitive user interface is designed for quick navigation between functions, allowing specialists and technicians to focus on their tasks without unnecessary distractions.

Another significant characteristic is its robust build quality. The VT1621-01 is designed to withstand the rigors of daily use in field environments, with a durable casing that protects internal components from impacts, dust, and moisture. This reliability is vital for professionals who often work in demanding conditions.

In summary, the Olympus VT1621-01 is an exemplary measurement instrument characterized by its multifunctionality, advanced technology, easy-to-read display, and rugged design. It has become an essential tool for professionals who require precision, efficiency, and durability in their measurement tasks, solidifying its reputation as a trusted device in the market.