Olympus VT1621-01 manual Camera Care and Storage Handling, Selecting batteries for your camera

Models: VT1621-01

1 202
Download 202 pages 45.45 Kb
Page 9
Image 9

2.To avoid damaging your eyes, never aim the camera directly into the sun, or any other extremely bright light source.

3.To avoid causing a fire or explosion, never use the camera in near flammable or explosive gases.

4.Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury:

Becoming entangled in the camera strap, causing strangulation.

Accidentally swallowing a battery or small part.

Accidentally firing the flash into their own eyes or into the eyes of another child.

5.To avoid the hazards of fire or electrical shock, store the camera in a cool, dry location where it will not be subjected to high humidity or dust.

6.To avoid minor burns, never cover the flash with your hand when it is fired. Never touch the flash unit after continuous use. The flash unit becomes very hot during continuous operation.

7.If the camera is accidentally dropped in water, or if liquid is spilled into the camera, stop using the camera, allow the camera to dry, and then remove the batteries. Contact the nearest Olympus authorized service center.

CAUTION

1.During operation of the camera, if you notice any unusual odors, noise, or smoke around the camera, immediately switch the camera off, disconnect the optional AC adapter (if it is connected), and allow the camera to sit idle for a few minutes to allow it time to cool. Take the camera outdoors, away from flammable objects, and carefully remove the batteries to avoid burning your hands. Contact the nearest Olympus service center immediately.

2.Never attempt to disassemble the camera. The internal circuits contain high voltage points which could cause serious burns or electrical shock.

3.To avoid dangerous electrical shock, never hold or operate the camera with wet hands.

4.To avoid damaging the camera or causing a fire, never expose the camera to excessive heat.

Camera Care and Storage

Handling

Never store or use the camera for long periods in locations subject to direct sunlight, high humidity, extreme variation in temperature, or strong shocks and constant vibration. Protect the camera at all times from dust and sand.

Never store the camera near any type of appliance or equipment which generates high temperatures, low temperatures, high or low humidity, or a strong magnetic field. Never use the camera in a factory or laboratory where flammable gases are present.

Never shake the camera or subject it to shock or strong vibration.

To avoid damaging its precision lens, never leave the camera pointing directly into the sun.

Before storing the camera for a long period, remove the batteries. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, test the camera by pressing the shutter button to make sure that it is operating normally.

When the camera is mounted on a tripod, adjust the tripod head to re-position the camera; do not twist the camera.

Never touch the flash after it has been fired. Avoid using the flash for extended periods. Allow it to cool occasionally between shots.

To avoid injury from electrical shock, never attempt to disassemble or modify the camera in any way.

CAUTION

Selecting batteries for your camera

This camera can use four AA Ni-MH batteries, four AA alkaline batteries, four AA lithium batteries, four AA Ni-Cd batteries, or two CR- V3 lithium battery packs. Use of Olympus brand batteries is strongly recommended.

Alkaline battery performance is limited, especially at low temperatures. Using Ni-MH batteries is recommended.

AA manganese batteries cannot be used with this camera.

Always follow the battery recommendations and loading instructions. Incorrectly loading the batteries could cause the batteries to leak or overheating.

7

Page 9
Image 9
Olympus VT1621-01 manual Camera Care and Storage Handling, Selecting batteries for your camera

VT1621-01 specifications

The Olympus VT1621-01 is an advanced and versatile portable test instrument designed especially for professionals in the fields of engineering and maintenance. This device stands out for its ability to perform various measurements and is widely regarded for its precision and reliability.

One of the main features of the VT1621-01 is its comprehensive measurement capabilities. It can effectively measure voltage, current, resistance, and frequency, making it a multifunctional tool for troubleshooting and diagnostics. Its versatility ensures it caters to a wide range of applications, including electrical installations and maintenance tasks in industrial settings. The ergonomic design contributes to ease of use, allowing users to handle the device comfortably even during prolonged periods.

Technology-wise, the VT1621-01 incorporates cutting-edge digital signal processing (DSP) to ensure rapid and accurate measurements. This results in stable readings, even in challenging environments where interference might be present. Additionally, the device supports auto-ranging, which simplifies the user experience by automatically adjusting measurement ranges based on the detected input, thereby enhancing reliability.

The display of the VT1621-01 is another highlight, featuring a large, high-resolution LCD that presents data clearly and is easy to read, even in dimly lit areas. Backlighting options further enhance visibility, ensuring that users can operate the device in various lighting conditions. Moreover, its intuitive user interface is designed for quick navigation between functions, allowing specialists and technicians to focus on their tasks without unnecessary distractions.

Another significant characteristic is its robust build quality. The VT1621-01 is designed to withstand the rigors of daily use in field environments, with a durable casing that protects internal components from impacts, dust, and moisture. This reliability is vital for professionals who often work in demanding conditions.

In summary, the Olympus VT1621-01 is an exemplary measurement instrument characterized by its multifunctionality, advanced technology, easy-to-read display, and rugged design. It has become an essential tool for professionals who require precision, efficiency, and durability in their measurement tasks, solidifying its reputation as a trusted device in the market.