Taking Pictures:

Special Features

In this section we will describe some other important camera features.

 

• Taking multiple exposures. With one press on the shutter button,

 

you can shoot up to 4 rapid exposures in the sequential mode.

 

• Self-timer.In order to delay the shutter release, you can set the self-

 

timer so the camera fires 12 seconds after pressing the shutter button

 

so you can include yourself in the picture.

 

• Remote shutter release. You can use the electronic remote unit RM-

 

1 to release the shutter from in front of the camera, or use the remote

8

cable RM-CB1 attached to the camera to release the shutter without

manually pressing the shutter release and avoid camera shake during

a slow shutter release.

• Time-lapse photography. With the camera in the time-lapse mode,

you can set the camera to take pictures at any specified interval from

1 minute up to 24 hours in units of 1 minute.

• Memory card selection. With a SmartMedia and CompactFlash card

installed in the camera, you can select either card for storing images.

After one card fills up, just select the other card so you can continue

shooting.

• Shutter release sound. You can set the camera to emit a sound at

shutter release, or switch this feature off.

Warning beep. You can set the camera to emit a beep to alert you

• that a task has been completed (autofocus, exposure compensation

lock, etc.) or you can switch this feature off.

• Image display time. You can set the amount of time each picture is displayed on the monitor while it is being saved on the memory card.

• Setting the date and time. You can set the current date and time for images taken.

• Sleep mode. You can set the amount of time the camera remains idle before it powers down and enters the sleep mode. If the camera remains in the sleep mode for over one hour, it will power itself off automatically. These features are designed to conserve battery power.

• Reset. With a simple procedure, you can restore most camera settings to their factory default settings. (The defaults are the camera settings in effect when you purchased the camera.)

• RAW mode. Stores images on the card as raw data which is neither compressed nor enhanced by any camera feature such as sharpness, contrast, etc.

• Conversion lens setting. Shows you how to set up camera operation with an optional conversion lens mounted over the camera lens. For details about optional conversion lenses available for this camera, see Appendix 2: Available Options.

Page 112 Page 114
Page 113
Image 113
Olympus VT1621-01 manual Taking Pictures Special Features
Page 112 Page 114

VT1621-01 specifications

The Olympus VT1621-01 is an advanced and versatile portable test instrument designed especially for professionals in the fields of engineering and maintenance. This device stands out for its ability to perform various measurements and is widely regarded for its precision and reliability.

One of the main features of the VT1621-01 is its comprehensive measurement capabilities. It can effectively measure voltage, current, resistance, and frequency, making it a multifunctional tool for troubleshooting and diagnostics. Its versatility ensures it caters to a wide range of applications, including electrical installations and maintenance tasks in industrial settings. The ergonomic design contributes to ease of use, allowing users to handle the device comfortably even during prolonged periods.

Technology-wise, the VT1621-01 incorporates cutting-edge digital signal processing (DSP) to ensure rapid and accurate measurements. This results in stable readings, even in challenging environments where interference might be present. Additionally, the device supports auto-ranging, which simplifies the user experience by automatically adjusting measurement ranges based on the detected input, thereby enhancing reliability.

The display of the VT1621-01 is another highlight, featuring a large, high-resolution LCD that presents data clearly and is easy to read, even in dimly lit areas. Backlighting options further enhance visibility, ensuring that users can operate the device in various lighting conditions. Moreover, its intuitive user interface is designed for quick navigation between functions, allowing specialists and technicians to focus on their tasks without unnecessary distractions.

Another significant characteristic is its robust build quality. The VT1621-01 is designed to withstand the rigors of daily use in field environments, with a durable casing that protects internal components from impacts, dust, and moisture. This reliability is vital for professionals who often work in demanding conditions.

In summary, the Olympus VT1621-01 is an exemplary measurement instrument characterized by its multifunctionality, advanced technology, easy-to-read display, and rugged design. It has become an essential tool for professionals who require precision, efficiency, and durability in their measurement tasks, solidifying its reputation as a trusted device in the market.
Top Page Image Contents