Bracketing a Shot with Three Automatic Exposures (continued)

7

Control panel

Autobracket setting mark

Sequential mode

Sequential mode selected automatically when autobracketing is selected.

Note

7 Press the button.

This completes setting the camera for autobracketing. In the control panel, you will see BKT and the sequential mode

markdisplayed. This confirms that the camera is set for both autobracketing and shooting multiple exposures. (When shooting in the single-frame mode, hold

down the drive button and turn the main dial or sub dial until you do not see

the sequential mode mark displayed in the control panel.)

Press the button again to close the menu.

8 Take the picture.

When the camera is set in the sequential mode, press the shutter button once to shoot three rapid pictures with the exposure setting varied automatically for each shot.

When the camera is set in the single- frame shooting mode, you must press the button once to take each picture with the exposure setting varied automatically for each shot.

•The autobracketing setting is disabled and cannot be used in the following cases:

-When the mode dial is set to M (Manual mode)

-When the flash button is pressed and the built-in flash is raised.

•The mode dial setting determines which features are changed during autobracketing.

P Program mode. Shutter speed and aperture value adjusted.

A Aperture priority mode. Shutter speed adjusted. S Shutter priority mode. Apeture adjusted.

•The shutter speed and aperture value display the adjusted exposure.

•If autobracketing (➞ 81) and exposure compensation (➞ 79) are selected together, then values are calculated for both during shooting with autobracketing.

•If the camera is switched off suddenly during autobracket shooting, the camera will finish the autobracketing shooting sequence after the camera is switched on again.

•Autobracketing will halt as soon as you release your finger from the shutter button and resume shooting the remaining pictures after you press the shutter button again.

•With the camera set in autobracketing, you cannot select the self-timer mark, or the remote control mark . To select these marks, release the camera from autobracketing with the menu.

•If you select autobracketing while the self-timer mode or the remote control mode is set, both modes will be automatically released.

82

Page 83 Page 85
Page 84
Image 84
Olympus VT1621-01 manual Bracketing a Shot with Three Automatic Exposures, Sequential mode
Page 83 Page 85

VT1621-01 specifications

The Olympus VT1621-01 is an advanced and versatile portable test instrument designed especially for professionals in the fields of engineering and maintenance. This device stands out for its ability to perform various measurements and is widely regarded for its precision and reliability.

One of the main features of the VT1621-01 is its comprehensive measurement capabilities. It can effectively measure voltage, current, resistance, and frequency, making it a multifunctional tool for troubleshooting and diagnostics. Its versatility ensures it caters to a wide range of applications, including electrical installations and maintenance tasks in industrial settings. The ergonomic design contributes to ease of use, allowing users to handle the device comfortably even during prolonged periods.

Technology-wise, the VT1621-01 incorporates cutting-edge digital signal processing (DSP) to ensure rapid and accurate measurements. This results in stable readings, even in challenging environments where interference might be present. Additionally, the device supports auto-ranging, which simplifies the user experience by automatically adjusting measurement ranges based on the detected input, thereby enhancing reliability.

The display of the VT1621-01 is another highlight, featuring a large, high-resolution LCD that presents data clearly and is easy to read, even in dimly lit areas. Backlighting options further enhance visibility, ensuring that users can operate the device in various lighting conditions. Moreover, its intuitive user interface is designed for quick navigation between functions, allowing specialists and technicians to focus on their tasks without unnecessary distractions.

Another significant characteristic is its robust build quality. The VT1621-01 is designed to withstand the rigors of daily use in field environments, with a durable casing that protects internal components from impacts, dust, and moisture. This reliability is vital for professionals who often work in demanding conditions.

In summary, the Olympus VT1621-01 is an exemplary measurement instrument characterized by its multifunctionality, advanced technology, easy-to-read display, and rugged design. It has become an essential tool for professionals who require precision, efficiency, and durability in their measurement tasks, solidifying its reputation as a trusted device in the market.
Top Page Image Contents