Manuals / Olympus / Photography / Camera Accessories

Olympus VT1621-01 manual 120, Actual time interval, Viewing pictures during time lapse photography

Models: VT1621-01

1 202
Download 202 pages 45.45 Kb
Page 122
Image 122

Using Time-Lapse Photography (continued)

Actual time interval

The time interval set in the menu is the time when the next picture will be taken after the camera enters the sleep mode, so there is some additional time lapse until the camera enters the sleep mode before the time interval actually takes effect. The actual time is calculated with the following operation times:

•Exposure time (determined by the shutter speed)

•Time required to save the picture on the card (determined by the record mode. A few ~ some ten seconds)

•Time to display the time lapse information (about 5 seconds)

•Time to recharge the flash (when flash is used. About 7 seconds)

(The time interval between first shot and the second shot is significantly longer. However, after the second shot, the length of the time intervals conform with the description above.)

Viewing pictures during time lapse photography

If you need to view pictures taken in the time lapse mode, release the camera from the time lapse mode temporarily.

Note

•Changing a setting while the camera is in the time lapse mode could release the camera from the time lapse mode, and some settings cannot be changed with the camera in the time lapse mode. (If you need to change a setting, temporarily release the camera from the time lapse mode.)

•Time-lapse operation stops if batteries go dead. We recommend that you connect the optional AC adapter or use the optional lithium polymer battery during time-lapse sessions.

•Set up the camera indoors where it will not be exposed to direct sunlight for a long period, and use a tripod to fix it in position. If the camera is exposed to direct sunlight for a long period, the light striking the lens could damage the internal CCD.

•Avoid setting up the camera to shoot for 24 hours or so under adverse conditions.

•Keep in mind that that CCD may be damaged if the sun moves into a position where it shines directly into the lens for a long time. If you are setting up a lengthy outdoor time-lapse sequence, be very sure that you position the camera so that the sun will not enter the scene.

•Setting up a long shooting session with short time intervals between shots could cause the flash unit to deteriorate, and such damage to the camera may not be covered by the warranty, so use the camera carefully.

120

Page 121 Page 123
Page 122
Image 122
Olympus VT1621-01 manual 120, Actual time interval, Viewing pictures during time lapse photography
Page 121 Page 123

VT1621-01 specifications

The Olympus VT1621-01 is an advanced and versatile portable test instrument designed especially for professionals in the fields of engineering and maintenance. This device stands out for its ability to perform various measurements and is widely regarded for its precision and reliability.

One of the main features of the VT1621-01 is its comprehensive measurement capabilities. It can effectively measure voltage, current, resistance, and frequency, making it a multifunctional tool for troubleshooting and diagnostics. Its versatility ensures it caters to a wide range of applications, including electrical installations and maintenance tasks in industrial settings. The ergonomic design contributes to ease of use, allowing users to handle the device comfortably even during prolonged periods.

Technology-wise, the VT1621-01 incorporates cutting-edge digital signal processing (DSP) to ensure rapid and accurate measurements. This results in stable readings, even in challenging environments where interference might be present. Additionally, the device supports auto-ranging, which simplifies the user experience by automatically adjusting measurement ranges based on the detected input, thereby enhancing reliability.

The display of the VT1621-01 is another highlight, featuring a large, high-resolution LCD that presents data clearly and is easy to read, even in dimly lit areas. Backlighting options further enhance visibility, ensuring that users can operate the device in various lighting conditions. Moreover, its intuitive user interface is designed for quick navigation between functions, allowing specialists and technicians to focus on their tasks without unnecessary distractions.

Another significant characteristic is its robust build quality. The VT1621-01 is designed to withstand the rigors of daily use in field environments, with a durable casing that protects internal components from impacts, dust, and moisture. This reliability is vital for professionals who often work in demanding conditions.

In summary, the Olympus VT1621-01 is an exemplary measurement instrument characterized by its multifunctionality, advanced technology, easy-to-read display, and rugged design. It has become an essential tool for professionals who require precision, efficiency, and durability in their measurement tasks, solidifying its reputation as a trusted device in the market.