Olympus VT1621-01 manual 147, Cannot copy?, Folder and file names of copied pictures

Copying from a SmartMedia to a CompactFlash card

8 9

During copying

7 Press the button.

COPY? is displayed.

Check the display and make sure that the source and target selections are correct. If the selections are reversed, with NO

selected press the button, and then start again from Step 2.

8 On the arrow pad, press to move the green highlight to YES.

9 Press the button.

A progress bar is displayed as the images are copied. After copying is completed, the first displayed image appears.

Cannot copy?

• NO CARD displayed?

The destination card is not inserted in the camera. Insert the destination card.

• CARD FULL displayed?	10
Storage space on the destination card is
insufficient. Create more space on the
destination card by deleting images. You can
also copy fewer images by selecting only the
images that you want to copy. (➞ 148)

•WRITE PROTECT displayed?

The card selected to store the copied image is protected with a protect seal. Replace the card, select the other card, or remove the protect seal.

Folder and file names of copied pictures

Copied images are assigned new file names and stored in a new folder. The date and time the images were created (time stamp) retain the original creation date and time stored with the images.

Copying images not taken with this camera

All pictures taken with this camera are stored in DCF (Design rule for Camera File system) format. Pictures taken and stored with another camera can be copied if they are in DCF format. Pictures not in DCF format cannot be copied to a memory card in this camera.

Caution

•To avoid interrupting the copy operation, while images are being copied from one card to another, never switch the camera off, never reset the mode dial, and never open the memory card cover. If you interrupt the copy operation in progress, the copying will be canceled and cannot be restarted.

147