Information codes
Information codes | Checklist |
The robot vacuum cleaner is caught, stuck or trapped while moving around.
• Turn off the power switch and move the robot vacuum cleaner to another area.
Foreign matter caught in the Power brush.
• Turn off the power switch and remove the foreign matter from the Power brush.
Foreign matter caught in the left Driving wheel.
• Turn off the power switch and remove the foreign matter from the Driving wheel.
Foreign matter caught in the right Driving wheel.
• Turn off the power switch and remove the foreign matter from the Driving wheel.
Bumper sensor needs to be checked.
• Turn off the power switch and turn it back on.
• Contact a service center if information code does not disappear.
Foreign matter accumulated on the obstacle sensor.
• Turn off the power switch and clean the front and rear sensor with a soft cloth.
Foreign matter accumulated on the cliff sensor.
• Turn off the power switch and clean the cliff sensor with a soft cloth.
Foreign matter caught on the side brush.
• Turn off the power switch and remove the foreign matter from the side brush.
If press Start/Stop button or turn off the power switch, the information code will be cleared.
Appendices
35