installation & maintenance

CAUTIONS WHEN INSERTING THE DRAIN HOSE

Less than 3 m

1.Don’t exceed more than 3 m when the 2. Be careful to drain water out at the end of

drain hose is used by connecting with

the drain hose.

other hoses.

 

Less than 3 m

Less than 5 cm

3.The doorsill shoudn’t be more than 5cm. 4. Don’t install the drain hose underneath the wash machine.

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete.

CALIBRATION MODE

Your Samsung washing machine detects the laundry weight automatically.

For more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps:

1.Remove laundry or any contents in the machine.

2.Press the Delay End and Spin buttons simultaneously, and then press the Power button. The Machine turns on with “Cb”

3.Press the Start/Pause button to activate “Calibration Mode”.

4.The drum rotates for approximately 4 minutes.

5.When “Calibration Mode” is fi nished, “End” appears on the display, and the machine automatically turns off. The washing machine is now ready for use.

20_installation & maintenance

F700S_W3050_WA18F7-03271E_EN.indd Sec6:20

2013-04-02 ￿￿ 2:49:42

Page 20
Image 20
Samsung WA13F7S6DWA/YL, WA13F7S4UWW/YL, WA14F7S8DTA/YL, WA15F7S8DTA/YL manual Calibration Mode, Other hoses, Test run