![](/images/new-backgrounds/1274905/27490533x1.webp)
NOTE
•After connecting the water hose to the adaptor, check if it is connected properly by pulling the water hose downwards.
•Use a standard type of water tap. If the tap is
For models with an additional hot water inlet:
1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the hot water tap.
Installation
STEP 4 Position the drain hose
General type
1. Press and hold down the joint ring, and insert it into the drain hose.
2. Insert the drain hose into the drain outlet. Make sure to connect them firmly using the joint ring.
The drain hose is extensible. Adjust the length of the drain hose as needed.
English 17