Before you start

Prewash (Water Jet & Built-in sink)

Water Jet and Built-in sink help you hand-wash before the washing machine starts operation. Water Jet is available only when the door is open and the water level set to less than High. For prewashing, use the Built-in sink that is designed for hand-washing.

CAUTION

Do not excessively use Water Jet. Excessive use of Water Jet increases water consumption.

Gently run water into the tub. Otherwise, water may overflow.

1.Press the release lever on the middle of the door. Put laundry in the Built-in sink.

2. Press Water Jet to supply water to the Built-in sink, and then hand-wash.

3. When done, you can either reuse the water for the main cycle or simply drain.

• To reuse the water, gently lift up the Built-in sink to drain water into the tub.

• To drain the water, press Activ Dual Wash, and then select Drain.

NOTE

• If you want to hand-wash while the washing machine is operating, press START/PAUSE to stop operation, and then follow steps 1-3 above.

• If you open both the door and the Built- in sink, manually lower the Built-in sink.

Before you start

English  21

WA8700K(HEATER)_03804D-00_EN.indd 21

2017-01-24 ￿￿ 8:02:07

Page 21
Image 21
Samsung WA21M8700GV/SV manual Before you start, Prewash Water Jet & Built-in sink