
Installation
Installation
3.If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure.
If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary.
NOTE
Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer.
B
C
STEP 5 Powering your washer
Plug the power cord into a
Your washer is grounded through the third prong of the power cord when plugged into a
Test run
Make sure that you install your washer correctly by running the Rinse+Spin after the installation is complete.
24 English
2015/7/25 16:55:30