Samsung WA22J8700GP/YL manual Water Saving

		This button provides two options, and is available only when the
		washing machine is stopped or in Standby state.
07	Activ Dual	• Water Save (default): Reuse water in the tub that remains
		after using Water Jet. The water will be used for the main cycle.
	Wash Drain
		• Drain: Select to drain water that remains after using Water Jet.
		When draining is complete, the washing machine switches to
		Water Save mode automatically. Then, you can choose a cycle.
		Selects this cycle to load the settings for the last cycle.
		Perform a wash cycle using the last used settings without having
08	Last Setting	to enter them manually again. Your choices are automatically saved
		when you press the Start/Pause button. To use a memorized cycle,
		press the Last Setting button and then press the Start/Pause button.
09	Pre Soak	Remove stains more thoroughly by specifying additional time.
10	Delay End	Delay the end of any cycle for up to 19 hours in one-hour increments.
		Displayed hour indicates the time the wash will be ended.
11	Wash	Press this button to only perform a wash cycle or to adjust the wash
		time.
12	Rinse	Press this button to only perform a rinse cycle or to adjust the rinse
		count.
		Press this button to perform a spin cycle only or to adjust the spin
		time.
		You can set the spin time from between 1 to 9 minutes. (except for
13	Spin	WATER SAVING )
		When only a spin is selected, the spin time will be different from the
		total remaining time. This is because the total remaining time includes
		the actual spin time and the times for water draining and stopping.
14	Start/Pause	Press to pause and restart cycles.
		Press once to turn your washer on. Press again to turn your washer
15	Power	off. If the washer is left on for more than 10 minutes without any
		buttons being pressed, the power automatically turns off.

Washing a load of laundry

English  29

WA8700J_WA22J8700GP-03133Z-02_YL_EN.indd 29

2015/7/25 16:55:31