Wireless Audio - Multiroom
HUBUser Manual
AH68-02717A-01
AAFront Panel
q w e r
1 |
| This indicator turns on when power is supplied to the HUB. |
| ||
| ||
2 |
| This indicator blinks when the HUB is in pairing mode. |
| After pairing is complete, this indicator stops flashing and operates in normal mode. | |
| Pairing mode continues for a set time period. The indicator may keep blinking after pairing is | |
3 |
| completed. |
| This indicator turns on when the HUB is connected to a wireless router with an Ethernet cable. |
This indicator turns on when the HUB is set to Repeater mode and used to expand wireless
4 coverage in a network that includes another HUB and a wireless router.
If you have trouble connecting the HUB and Wireless Audio - Multiroom because the signal is blocked or the distance between them is too great, add a new HUB in Repeater mode to expand wireless coverage.
AARear Panel
qw e r | t |
1 |
| Press this button to set the HUB to Pairing mode when adding an additional |
SPK ADD | Wireless Audio - Multiroom or to switch the HUB to Repeater mode. | |
(Press and hold for 1 second to switch to Pairing mode. Press and hold for 10 | ||
2 |
| seconds to switch to Repeater mode.) |
SERVICE | Used to update the firmware. | |
The SERVICE port is only for updating. | ||
|
| Used to connect a LAN cable. |
3 |
| If you want to connect another wired device to the router that the HUB is |
ETHERNET SWITCH | connected to, and all the router’s wired ports are occupied, you can connect it | |
to an unoccupied LAN port on the HUB. | ||
|
| Connecting to the HUB provides the same functionality as being connected to the |
|
| router. However, the link to the router will be lost if you power off (unplug) the HUB. |
4 |
| Note : The HUB and the router must have a |
RESET | Press the RESET button with a pen tip for 5 seconds to reset the HUB. | |
5 | DC IN | Connector for the power cable. |
AAWhat’s included
LAN cable | Power Adaptor | User Manual |
AAConnecting the HUB to Your Wi-Fi Network
•A Wireless Audio - Multirooms can be used anywhere your
1Connect the HUB to your router or modem using a LAN cable.
LAN
➜ | Plug the included power cable into the back of |
2 | |
| the HUB, and then plug the power cord into a wall |
Plug | socket. |
In |
|
➜ | After the Pairing Indicator on the HUB lights, plug in |
3 | |
Plug | the Wireless Audio - Multiroom. |
In | (For more information, see the User Manual.) |