To share the drain hole with an existing washing machine (applicable No Pump models only)

To share one drain hole with an existing washing machine, use the drain T adaptor.

1.Connect the drain hose (A) of the sanitizing washing machine

to one end of the drain T adaptor (B).

2.Insert the drain hose (C) of the existing washing machine in its drain adaptor (D).

For a fully automatic washing machine, please skip steps 2 and 3, and go directly to step 4.

AB

B C

3.Use cable ties to tighten the joint if loose.

D C

4.Connect the drain hose (C) of the existing washing machine

to the drain T adaptor (B).

5.Insert the drain T adaptor to the drain hole (E) as shown.

E

CAUTION

If the drain T adaptor does not fit in the drain hole, water may leak around the drain hole.

Ensure that the drain T adaptor covers the drain hole.

English - 16

Untitled-6 16

2014-11-26 ￿￿ 5:02:08

Page 16
Image 16
Samsung WB25H7000GS/YL manual English