Step 3 - Connect the drain hose
1.Insert the joint ring (A) around the drain hose.
A
2. Connect one end of the drain hose into a drain hole, and join the other end of the drain hose into the drain outlet of the washing machine.
3.Tighten the drain hose by pushing the joint ring into the drain
outlet. The length of the drain hose is adjustable so that it can be extended as required.
Pump draining system (applicable models only)
1.Connect the drain hose (A) to the case pump outlet pipe with the hose tilted at a 2 o'clock angle.
The drain hose goes over the case pump outlet pipe. |
|
Make sure that you connect the drain hose so that less | A |
than 1/3 rd (10 mm) of the pipe remains exposed. |
|
2.Clamp the drain hose using a joint ring (B).
Make sure the joint ring is clamped with its two prongs facing the washer.
B
English - 13
INSTALLATION
