Before you start
1.Open the water tap.
Check if the water supply hoses are correctly connected to |
|
the corresponding tap (cold/hot water). | 1 |
2. Plug the power cable into a 230 V wall socket.
3.Ensure that the drain hose is placed as instructed.
2
3
Washing for the first time
1.Place the laundry into the tub, add an appropriate amount of detergent, and then close the door. For effective washing, add detergent and bleach into the tub before adding the laundry.
2.Press the POWER button.
3.Press the Baby care or Course button to select a cycle.
4.Press the Water Level button to specify the water level according to the load of laundry and select the water supply type (cold or hot water).
The default water level is set for each cycle, and the default water supply type is cold water.
5.Press the Rinse button to select the number of rinse cycle.
(The number of rinse cycles cannot be changed during the last rinse cycle or the spin cycle.)
6.Press the START/PAUSE button.
7.Close the door.
•If the door stays open when the washing machine starts operating, the washing machine will stop the current operation for safety reasons. (However, the water supply will continue even though the door is opened)
•To change the wash cycle, press the START/PAUSE button, select a cycle and then press the START/PAUSE button again.
•If you want to add the soak cycle, press the Soak button before starting the wash. The Soak cycle is not available for courses: Delicates, Quick Wash, Rinse+Spin, Spin, or Eco Tub Clean.
English - 27
OPERATIONS BASIC
|
| ||
|
| ||
|
|
|
|