Samsung WB25H7000GS/YL manual To connect the hot water supply hose applicable models only

6.Open the water tap and ensure that no water leaks from the

water supply intake, water tap or adaptor. If you encounter a water leak, repeat the steps above.

WARNING: In case of a water leak, stop using the washing machine. Otherwise, this may result in electric shock.

If the water tap is of the screw type, connect the water supply hose to the tap as shown.

Use the most conventional type of tap for the water supply. If the tap is square or too big, remove the space ring before inserting the adaptor into the tap.

To connect the hot water supply hose (applicable models only)

1.Connect the red L-shaped arm fitting for the hot water supply hose to the hot water supply intake at the upper rear side of

the washing machine. Then tighten it by manually turning part

(A) clockwise.

2.Connect the other end of the hot water supply hose to the hot water tap in the same way as you connected the cold water supply hose.

To use only cold water, use the Y-piece.

English - 11

INSTALLATION

A

Untitled-6 11

2014-11-26 ￿￿ 5:02:06