Operations
Control panel
The actual design of the control panel may differ with the model.
02
11
06 | 07 | 08 |
02
01
12
10 | 03 | 04 | 05 | 09 |
|
01 Cycle Selector | Turn the dial to select a cycle. |
|
|
| The display shows current cycle information and estimated time |
02 Display | remaining, or an information code when a problem occurs. |
| For buttons and icons, refer to the corresponding page. |
03 
Temp. Press to change the water temperature for the current cycle.
04 | Rinse | Press to change the rinse count for the current cycle. You can set | ||||
the rinse count to a max of 5, depending on the cycle. | ||||||
|
| |||||
|
|
| ||||
|
| Press to change the spinning speed for the current cycle. The | ||||
|
| revolutions per minute (RPM) differs with the model. | ||||
|
| • | Rinse Hold: The final rinse process is suspended so that the | |||
|
|
| laundry remains in the water. To unload the laundry, run a | |||
|
|
| drain or spin process. |
|
| |
|
|
| - To use the Rinse Hold option, press | Spin repeatedly until | ||
|
|
| the Rinse Hold ( | ) indicator turns on. | ||
05 | Spin | • | No Spin: The drum does not rotate after the final drain process. | |||
| - To use the No Spin option, press | Spin repeatedly until the | ||||
|
|
| ||||
No Spin ( 
) indicator turns on.
•Spin Only: To run the Spin Only cycle, press 
Spin for
3 seconds. When the cycle time and spinning speed appear, press 
Spin repeatedly until a desired spinning speed is selected. Then, press and hold 
Start/Pause (Hold to Start) to start the cycle. The spinning time depends on the selected cycle.
Operations
English 35
