Installation

Installation

STEP  4  Connect the water hose

The provided hose adaptor may differ with the model. This step guides you through connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go to 7.

 

Connect the water hose to the water tap.

 

1. Remove the adaptor (A) from the water

A

hose (B).

 

B

2. Use a Philips screwdriver to loosen four screws on the adaptor.

3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).

C

4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.

5. Turn part (C) in the arrow direction to tighten it.

C

24  English

 

 

 

 

WD19J9810KG_DC68-03474G-01-EN.indd 24

2016/6/17 19:05:10