washing a load of laundry
11 ( )START/PAUSE | Press to pause and restart a cycle. |
SELECTION BUTTON |
|
Press it once to turn your washing machine on, press it again to turn your
12( 
)POWER BUTTON washing machine off. If the washing machine is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.
Child lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function, press the Temp.(
) and Rinse( 
) buttons at the same time for 3 seconds. “Child Lock 
” will be lit when this feature is activated.
When the Child Lock function is activated, only the Power ( 
) button works. The Child Lock function remains on even after the power is turned on and off or after the disconnecting and reconnecting the power cord.
3 SEC.
Sound off
The Sound Off function can be selected during all courses. When this function is selected, sound is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, press the Sound Off( 
) button. The lamp on the Sound Off( 
) button and the control panel will be lit when this feature is activated.
Delay end
You can set the washing machine to fi nish your wash automatically at a later time, choosing a delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the wash will be fi nished.
1.Manually or automatically set your washing machine according to the type of laundry you are washing.
2.Press the Delay End(
) button repeatedly until the delay time is set.
3.Press the Start/Pause( 
) button. The “Delay End 
” indicator will be lit, and the clock will begin counting down until it reaches the set time.
4.To cancel a Delay End function, press the Power( 
) button and then turn the washing machine on again.
Drain Only Fuction
When you want just drain water from washing machine, follow directions below.
1.Press the Power( 
) button
2.Turn the Cycle Selector to the Spin positio.
3.Press the Spin(
) button 1 times until rpm sign is off.
4.Then “1” shows up on time display in center.
5.Press the Start/Pause( 
) button.
20_ washing a load of laundry
