setting up your washing machine

Connecting the water supply hose (selected models)

1. Remove the adaptor from the water supply hose.

Adaptor

Water supply hose

2.First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.

1

5 mm

2

 

3.Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

1

4.Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

Water tap

2

3

5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the hose clockwise all the way in.

18_ setting up your new washing machine

WF0600NC-02801R_EN.indd 18

2010-6-29 15:09:33

Page 18
Image 18
Samsung WF0602NCE/YLE Connecting the water supply hose selected models, Remove the adaptor from the water supply hose