Samsung WF1802LSW2/YLE manual Powering your washing machine, Connecting the drain hose, Test run

setting up your washing machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1.Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

Drain hose

Hose guide

60 ~ 90 cm

2.ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

3.ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.

The standpipe drain requires;

•	minimum diameter 5 cm.
•	minimum carry-away capacity 60 liter per minute.
	60 ~ 90 cm

STEP 5

Powering your washing machine

Plug the power cord into a wall sockets, an AC 220-240 V / 50 Hz approved electrical outlet protected by a fuse or circuit breaker. (For more information on electrical and grounding requirements, see page 14.)

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete.

20_ setting up your new washing machine

WF1802LSW-03265B-01_EN.indd Sec4:20 2013-02-20 ￿￿ 9:52:12