Samsung WMN5090A Resetting the Picture Settings to the Factory Defaults, Time minute, Min

➢Optimum condition for pixel shift;

	PC	TV/Ext/AV/Component/
		HDMI/DTV
Horizontal Dot	1	2
Vertical Line	1	2
Time (minute)	2	2 min

➢The Pixel Shift value may differ depending on the monitor size (inches) and mode.

T V		Pixel Shift
	Pixel Shift		: On	
	Horizontal Dot		: 2	
	Vertical Line		: 2	
	Time		: 2 min	
	Move		Enter	Return

−White: This function helps remove after images on the screen by changing the colour of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.

−Scrolling: This function helps remove after images on the screen by moving all the pixels on the

PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.

−Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

➢To remove after images on the screen, use either White or Scrolling function. Although both of the two functions remove after images on the screen, Scrolling is more effective.

➢The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not improved after the execution of the function, repeat the function again.

➢Press any button on the remote control to cancel this feature.

Resetting the Picture Settings to the Factory Defaults

You can set detailed picture settings.

1Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ▲ or ▼ button to select Reset, then press the ENTER button.

4Press the ▲ or ▼ button to select OK or Cancel then press the ENTER button.

➢ Each mode can be reset.

T V	Picture
Mode		: Standard
Cell Light									
Contrast						0
Brightness								45
Sharpness							50
Colour							50
Tint	G50					R50
Detailed Settings
Picture Options
Reset		: OK		OK
			Cancel
Move	Enter				Return

English - 22