Figure 5: Top Level Menu
Each item on this top level menu has additional sub menus that are shown in the Diagrams of Top Level section on Page 23. Each submenu has its own settings and each setting has its own parameters that you can configure.
Access the Top Level Menu
Follow these steps to access the top level menu:
1.Press the Power/Menu Button briefly once. The SanDisk logo will appear onscreen after a moment then disappear. (Can’t find the Power/Menu Button on your player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says “Key Hold” and then shuts off, you need to locate the Hold Button on the left side of your player. Slide that button up to unlock your device. Then repeat Step 1 above. See The Basic Controls section on page 3 if you cannot find the Hold button.
2.Press the Power/Menu Button again briefly. The top level menu shown in Figure 6 above will appear onscreen.
Move between Menus, Settings, and Parameters
When you have the top level menu displayed, as described above, you can move between the menus, settings, and parameters as follows (see The Basic Controls section on Page 3 to locate the controls mentioned below):
To navigate between the top level menu and between the sub menus underneath each top level menu, press the Previous/Fast Reverse Button and Next/Fast Forward Button.
To choose a top level menu or sub menu, as well as the setting you want to configure and setting parameters you want to save, press down on the Select Button.
To scroll up or down settings for a sub menu press the Play/Pause/Up Button or the Repeat/AB/Down Button.
To define the parameters of a sub menu setting, press the Play/Pause/Up Button and the Repeat/AB/Down Button to scroll through parameter options. Or press the
