Sangean Electronics WFT-1 Clock Operation, Setting the time The direction of Time menu is

Clock Operation

Setting the time

(The direction of Time menu is

Main menu > System setup > Time setup >Set clock)

1. Go into the main menu. (press the BACK button to go to the top menu if it is not under the top menu). Rotate the TUNING knob until the “Main menu” is pointed. Then press the TUNING knob.

2. Use the same way to enter the “System setup”.

3. Use the same way to enter the “Time setup”.

4. Use the same way to enter the “Set clock”.

5. Rotate the TUNING knob to set the hour digits.

6. Press the TUNING knob and rotate it to set the minute digits.

7. Press the TUNING knob then the time is set.

Setting the date

(The direction of Date menu is

Main menu > System setup > Time setup >Set date)

8.Rotate the TUNING knob until the “Set date” is pointed. Then press the TUNING knob.

9.Rotate the TUNING knob to set the month, then press the TUNING knob.

10.Rotate the TUNING knob to set the date, then press the TUNING knob.

11.Rotate the TUNING knob to set the year, then press the TUNING knob. Then the date is set.

* You can always start over the menu to the top level by pressing the BACK button.

GB

14