NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM | SOLUTION |
|
Motor will not start. | Push plug securely into outlet. |
|
| Try another outlet. |
|
| Check circuit breaker. |
|
Motor suddenly | Thermal Cut Off, see Page 2. |
|
stops. |
|
|
Does not clean the | Clean or replace the filters: Hint: If picking |
|
carpet or floor. | up fine dust, the filters may not look dirty, but a |
|
| fine substance tends to reduce suction when it |
|
| blocks the airflow through the filters. |
|
| Be sure the dust bag is properly seated into the |
|
| cleaner body. Page 8. |
|
| Replace dust bag. Page 8. |
|
| Be sure hose adapter is secure on back of cleaner. |
|
| Page 11. |
|
| Check base hose and long hose. Page 11. |
|
| Replace a broken, cut, loose or out of shape belt. |
|
| Clean hair and thread from bristles and end cap |
|
| area. |
|
| Replace brush roll if bristles are worn. |
|
No suction at the | Be sure hose adapter is secure. Page 11. |
|
end of hose. | Clean or replace filters. Hint: If picking up fine dust, |
|
|
| |
| the filters may not look dirty, but a fine substance |
|
| tends to reduce suction when it blocks the airflow |
|
| through the filters. |
|
| Remove any clogs from the hose that restrict the |
|
| airflow. Check base hose and long hose. Page 11. |
|
| Replace dust bag. Page 8 |
|
Headlight not | Replace light bulb. Page 9. |
|
working. |
|
|
Noise from brush | Remove hood and clean debris or items |
|
roll area. | from the brush roll area. |
|
| Replace a broken, cut, loose or out of shape belt. |
|
| Page 10. |
|
Cleaner is hard to | Put handle in operating position. Tilt the |
|
push. | cleaner back to raise the front wheels off floor. |
|
| Then turn the knob to a higher setting. |
|
| Replace a broken, cut loose or out of shape belt. |
|
| Page 10. |
|
Cleaner height knob | Hint: Put handle in operating position. Tilt |
|
will not turn. | the cleaner back to raise the front wheels off floor. |
|
| Then turn the knob. |
|
Bag Cover will not go | Dust bag must be installed properly in cleaner or |
|
onto cleaner properly. | bag cover will not go onto cleaner. Make sure the |
|
| dust bag cardboard flange is on the support shelf. |
|
| See page 6. |
|
Hood will not come off. | Hood cannot be removed from cleaner unless the |
|
| cleaner height setting is in the lowest or highest |
|
| position. |
|
| All three screws must be removed from the top of |
|
| the hood. Page 10. |
|
Missing parts or | Call |
|
questions? | (CST), Monday through Friday and 10 a.m. to 6:30 |
|
| p.m, Saturday. Know the model and serial num- |
|
| bers when you call. |
|
|
| ©2003 White Consolidated, Ltd. |
Part No. 73524 (10/03) | Printed in U.S.A. |