Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

To connect the LCD TV to a VCR

Rear of the LCD TV

To AUDIO/VIDEO IN 1 (or 2)

Audio/Video cord (not supplied)

To Audio/Video OUT

To connect the LCD TV to a VCR with an S-Video cord

If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the LCD TV, you must also connect the audio cords to the AUDIO IN jacks on the rear of the LCD TV. The S-VIDEO cord only carries the video signal. The audio signal is separate.

Audio cord (not supplied)

Rear of the LCD TV

To S-VIDEO IN 1

S-Video cord (not supplied)

To AUDIO IN 1

To Audio OUT

To S-Video OUT

NOTE:

When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takes precedence over the video cord.

12

Page 12
Image 12
Sansui HDLCD3200 owner manual Connections to other equipment, To connect the LCD TV to a VCR, Rear of the LCD TV