Sansui HDLCD3200 owner manual Antenna connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

	Connect the 75 ohm cable from the combination
Antenna	VHF/UHF antenna to the antenna jack.
	Antenna
Jack	Jack
	If your combination VHF/UHF antenna has a 300
	ohm twin-lead wire, the use of the 300-75 ohm
	matching transformer may be necessary.
ANT	ANT

75ohm Coaxial Cable

300-75 ohm Matching Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

Jack

ANT

Combiner

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Com- biner, then attach the Combiner to the Antenna Jack.

UHF 300 ohm

VHF 300 ohm

300-75 ohm Matching Transformer

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

		Connect the VHF 75 ohm cable and UHF 300 ohm
Antenna		twin-lead wire to the Combiner (not supplied).
Jack		Attach the Combiner to the Antenna Jack.
	ANT

Combiner

UHF 300 ohm

VHF 75 ohm

10