ANT
ABCD
1 0
￿￿￿￿
SLEEP TIMER
2 h 00m
ANALOG
1 2
CABLE
TV operation
ANT
ABCD

NOTES:

The TV is capable of holding a still video image or On screen display image on your TV screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen.

When the TV receives an analog signal, DISPLAY shows only analog information.

After 10 seconds, DISPLAY screen will return to normal TV-operation auto- matically, when a Digital signal is received.

After 4 seconds, DISPLAY screen will return to normal TV-operation auto- matically, when a Analog signal is received.

CH /

Press and release CHor . The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See pages 18 and 19 “Memorizing channels”.

DISPLAY

Press DISPLAY to display the current information on the screen.

When the TV receives a digital signal, the digital information will appear.

Channel number

 

 

Broadcast program name

Station name

Remaining time

Audio language

Program guide

V-CHIP RATING

V-Chip mark

Sleep time

Picture size

When the TV receives a analog signal, the analog information will appear.

• Channel number or VIDEO mode selected

Channel label (if preset)

Stereo or SAP (second audio program)

audio status

Content rating

Sleep time

Picture size

Press DISPLAY again to clear the call display.

QUICK VIEW

This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press QUICK VIEW again to return to the last channel you were watching.

CABLE

ANALOG

MUTE

Press MUTE to switch off the sound. The TV’s sound will be silenced and “MUTE” will briefly appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or .

SLEEP

To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (OFF, 0h10m, ..., 1h50m, 2h00m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep

timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0h00m.

21

Page 21
Image 21
Sansui HDLCD3200 owner manual Display