Sansui HDLCD3200 owner manual TV operation, To Select Analog Channels, To Select Digital Channels

TV operation

1 To turn on the TV, press POWER.

2 Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases.

V O L U M E 2 5

NOTES:

•If a channel with no broadcast is selected, the sound will automatically be muted.

•It may take a few seconds for a digital channel picture to appear on screen after being selected.

3 Set the TV/CABLE menu
	TV - VHF/UHF channels
option to the appropriate	CABLE - CABLE TV channels
position (see page 18).
4 Press the Direct Channel
Selection (0-9, –) buttons to select
the channel.
TO SELECT ANALOG CHANNELS		C A B L E	A N T
			A B C D
		A N A L O G	1 2

1-9: Press 0 twice, then 1-9 as

needed. Example, to select channel 2, press 0, 0, 2.

10-99: Press 0, then the remaining 2 digits. Example, to select channel 12, press 0, 1, 2.

100-125: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the – button, followed by the remaining 3 digits.

Example, to select channel 015-001, press 0, 1, 5, –, 0, 0, 1.

•If a channel is selected with only audio content, “AUDIO ONLY” will be displayed on the screen.

•If a channel is selected with a weak digital signal, “DIGITAL CHANNEL SIGNAL STRENGTH IS LOW” will be displayed on the screen.

•If a channel is selected to which you have not subscribed, “DIGITAL CHANNEL IS SCRAMBLED” will be displayed on the screen.

VHF/UHF/CABLE CHANNELS

TV		CABLE
VHF		VHF
2-13		2-13
UHF	STD/HRC/IRC
14-69	14-36	(A) (W)
	37-59	(AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94	(86) (94)
	95-99	(A-5) (A-1)
	100-125 (100) (125)
	01	(5A)

20