Step 2: Mounting the Monitor Brackets to Televisions with a curved back or other obstruction.
Determine the diameter of the Bolt (T,U,V,W) your TV requires, by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance stop immediately. Once you have determined the correct diameter, refer to the appropriate Diagram below. Thread the Bolt through the appropriate Lock Washer (X,Y,Z,AA), a Washer (DD,EE), the Monitor Bracket (E), a second Washer (DD - M4/M5 diameter only), a Spacer (BB,CC), and finally into the TV. Make sure the Monitor Brackets are vertically centered and level with each other. Repeat the process until each Monitor Bracket is secured to the TV with two bolts.
M4 Diameter Bolt
M6 Diameter Bolt
DD | T | |
X | ||
| ||
| DD |
EE
V
Z
BBE
Diagram 2
M5 Diameter Bolt
DD | U |
| |
| Y |
DD
E
BB
CCE
M8 Diameter Bolt
W
AA
EE
E
CC