6 ASSEMBLE STORAGE SPACES
Screws (14 pcs)
1 Replace Back Cover
Replace the Back Cover to the Top Cabinet. Turn the Back Cover over, and fix the cover in the reverse to the initial position.
Back Cover
2Install Glass Doors
1.Remove the Hinge Covers by removing the 2 screws of each Hinge.
2.Hold the Glass Doors between the Glass Hinges and the Hinge Covers. Install the Glass Doors so that the side with the Holder Magnet is matched to the magnet inside of the Storage Spaces. Do not install the Glass Doors in the reverse. Tighten the screws and fix the Glass Doors.
3Adjustments of Doors
1.When adjusting the position of the Glass Doors, loose the Screws(A) and move the Glass Doors with the Hinges to the arrow direction until the surface of the door matches to the surface of the Cabinet Front.
2.When adjusting the tilt of the Glass Doors, adjust the Screws(B) (lower and upper) and move the Glass Doors.
4Install Compartment Shelves
IInsert the Shelves' Pins into appropreate position of the walls of Storage Spaces. Install the Compartment Shelves in Storage Spaces.
Holder Cover
Screws |
|
(2pcs x 4) | Holder Magnet |
|
Glass Door
Screw(A)
Screw(B)
Shelves' Pins (4 pcs X 4)
Compartment Shelves (4 pcs)