Sanyo C2462R, CL2462R Selecting the Installation Site, For stable operation, Air conditioner, do

Floor level

Minimum height from floor level 5 ft.

8. INSTALLATION INSTRUCTIONS

2)Selecting the Installation Site

Indoor Unit

AVOID:

areas where leakage of flammable gas may be expected.

places where large amounts of oil mist exist. (Fig. 2)

direct sunlight.

locations near heat sources which may affect performance of the unit. locations where external air may enter the room directly. This may cause “sweating” on the air discharge ports, causing them to spray or drip. (Fig. 3)

locations where the remote control unit will be splashed with water or affected by dampness or humidity.

Indoor unit

Drain hose

Outside drainage

2203_M_S

Fig. 2

DO:

select an appropriate position from which every corner of the room can be uniformly air-conditioned.

select a location that will hold weight of the unit.

select a location where the tubing and drain pipe have the shortest run to the outside. (Fig. 2)

allow room for operation and maintenance as well as unrestricted air flow around the unit. (Fig. 3a and 3b)

Install the unit within the maximum elevation difference above or below the outdoor unit and within a total tubing length from the outdoor unit as detailed in Table 1 and Fig. 1 on the previous page.

6 inches min. 6 inches
6 inches	min.
min.
INDOOR UNIT
Front View
Fig. 3a	2204_M_S
CAUTION
For stable operation of	Indoor Unit
the air conditioner, do	Wall

not install wall-mounted type indoor units less than 5 ft. from floor level.

2205_M_S

Fig. 3b

SM830092

– 24 –