GB
| Specification |
Common specification | |
Power source | 220~240V 50Hz |
Colour system | PAL NTSC3.5 ,SECAM |
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to pin 14) and
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI | Input : |
| |
PC | Input: |
| Mini |
|
|
| Audio 3.5mm Jack |
Serial port: RS232C: Input/Output | |||
Contrast Ratio | 1000:1 | ||
Screen(inches/ cm) | 42” / 107 cm | ||
(viewing measured |
|
| |
diagonally) |
|
| |
Display | Native Resolution 1366 x 768 (WXGA) | ||
Viewing angles | H:178°, V:178° | ||
Dimensions (WxHxDmm) | 1032x 625x126.5 (without stand) | ||
|
| 1032 x 683 x 340 (with stand) | |
Weight (kg) | 20 | (without stand) | |
|
| 21 | (With stand) |
GB
Helpful hints
■NO PICTURE, NO SOUND
● Check if monitor is plugged in.
● Check monitor is not in standby mode
■POOR PICTURE, SOUND OK
●Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
■NO COLOUR, PICTURE OK
● Adjust COLOUR control. ● Check lead connections
● Does the signal input have colour
■REMOTE CONTROL DOES NOT WORK
● Check batteries are inserted correctly ● Check condition of batteries
● Check to see if remote control inhibit is set ON
■PICTURE OK, NO SOUND
●Check external speakers are connected correctly
●Check lead connections to external equipment
●Volume turned down or mute selected
10
