1.The LCD display has a Standby light to show there is power.

Switching into/from standby mode

The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
●To turn the monitor into standby mode, press the 4button.
The blue power indicator illuminates more brightly
.
●To turn the monitor ON from standby mode, press any of the
following buttons: 4
,
5,6or
0-9 buttons.
2. Control buttons (bottom edge of cabinet)
Menu/F button: rotate between volume, Brightness, contrast,
colour, sharpness and OSD language.
Input/ OK button: switch between TV,AV1, RGB, AV2, AV3, DVI
and PC mode.
e d buttons: provide up and down adjustments

4button: To switch from display to standby mode (to switch off

completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menufunction, using the remote control handset.
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation.
Press the MENU button to enter the main menu.
Asub menu is selected using the eor dbutton and pressing the
1buttonwhen the required sub menu is highlighted.
When you have finished you can press the MENU button to exit,
then the MENU button again to exit the main menu.
1. Press the MENU button. Select Picture using the eor dbutton.
Press the1button to enter.
Set the picture settings for your “personal” preference.
2. Use the eor dbutton to select eg. Brightness and the 1
2button to adjust levels.
3. Preset :You can select either your “Personal” settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by using 1 2 to
select between Mid / Max / Auto / OFF /Min.
5. Dynamic skin tone: May be used to enhance skin tone by using
1 2 to select between On / Off.
Tint: is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by using 1 2 button to
select between Min / Mid / Max.
Press the MENU buttonto return to Main Menu. These settings
automatically store when you exit the menu.
Press the MENU button to exit menu.

7. Dynamic contrast (DCR): Improves the contrast leveL

✐Your personal settings are automatically saved when you exit the
menu.
Controls and Menus
GB GB
Picture menuMenu Operation
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.

6