Sanyo CLT-2422, CLT-2418 Speakerphone volume, Handset volume, Handset ringer, Base ringer

CLT-2422E-NEW 7/16/02 9:08 AM Page 14

BASICS

Using base speakerphone:

1.Press SPEAKER.

2.Dial the phone number. The screen shows:

Telephone number

Call timer Volume level

3.Press SPEAKER again to hang up.

Volume adjustment

The VOLUME keys on the handset adjusts the volume level of the handset’s earpiece. The VOLUME keys on the base controls the base speaker. There are four levels.

Speakerphone volume

1.Make sure the speakerphone is ON (SPEAKER key is lit).

2.Press VOLUME ▲ or ▼, on the base. The volume level shows on screen.

Handset volume

1.Make sure the handset is in TALK mode.

2.Press the VOLUME ▲ or ▼ key on the side of the handset. The volume level shows on screen.

BASICS

Ringer switch and volume

Handset ringer:

The RINGER switch must be on for the handset to ring during incoming calls.

Base ringer:

1.Make sure the speakerphone is OFF (SPEAKER key is not lit).

2.To increase the ringer volume to the highest level, press VOLUME ▲ .

3.To decrease the ringer volume level, press VOLUME ▼.

4.To turn off the ringer, press VOLUME ▼ until RINGER OFF shows on screen.

10: 04 AM	TIME
RINGER OFF

Speakerphone use

For best speakerphone performance, avoid the following:

•Areas with high background noise. (The microphone might pick up these sounds and prevent the speakerphone from going into the receiving mode when you finish talking.)

•Surfaces affected by vibration.

•Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which can generate an echo effect.

Tips:

•The speakerphone works similar to a 2-way radio. You can only listen or talk one at a time.

•Stay reasonably close to the phone so you can be heard clearly.

•The SPEAKER key lights up when the speakerphone is in use.

14 15