![BEFORE OPERATION](/images/new-backgrounds/10426/1042621x1.webp)
This instruction manual explains the various functions of this unit using the remote control.
The buttons on the main unit perform similar functions to similarly marked buttons on the remote control.
BEFORE OPERATION
Turning the power on and off
Press the z/ON button. “HELLO” appears briefly on the display. (After connecting the mains lead, when you press the z/ON button for the first time, the
-When the mains lead is connected to the AC outlet, the unit will respond to commands from the remote control.
Direct start function
If the following buttons are pressed when the unit is in standby, the unit turns on automatically and the selected function is activated.
Remote control | a (Play), TUNE/BAND, OPEN/CLOSE |
Main unit | a, q |
Selecting the function
Press the FUNCTION button to select the desired function. Each time the button is pressed, the display changes as follows:
DVD/CD v TV vVIDEO v FM TUNER v AM TUNER v. . .
-When the function selection is changed, disc play is automatically stopped.
Adjusting the volume
Press the “+” or
To reduce the volume temporarily
Press the MUTE button. “MUTE” blinks on the display. To restore the previous volume setting, press the MUTE button again.
Selecting the sound mode
1.Press the SOUND button repeatedly to select the desired sound mode (“BASS”, “TREBLE”, “CINE”:Cinema or
2.Press the button as desired.
Sound mode | Press | Display change |
BASS | 4or 5 | “+5” ~ |
TREBLE | 4or 5 | “+5” ~ |
CINE | ENTER | “ON” or “OFF” |
QS | ENTER | “LOW” or “HI” |
Note for “CINE”:
When enjoying a DVD disc with the volume set low at night, select this mode. It enhances spoken lines making speech clearer.
3.Repeat steps 1 - 2 for another sound mode.
4.Press the SOUND button repeatedly to close the display.
Bass boost system
Press the BASS button to select the desired bass boost effect. BOOST vBASS OFF v NORMAL . . .
Adjusting the display brightness
While pressing the n button on the main unit, press the ON SCREEN button on the remote control.
DIMMER 1 vDIMMER 2 v DIMMER 0 . . .
10