Sanyo DC-TS760 Picture zoom Pin point zoom DVD, Angle replay DVD, Repeat play, Random play CD

Picture zoom (Pin point zoom) [DVD]

1.Press the SHIFT + 3 ZOOM buttons during normal, slow or still play. The pin point guide screen appears.

1	2	3
4	5	6
7	8	9

-If you quit the screen, press the SHIFT + 3 ZOOM buttons.

2.Press the 4, a, 5or bbutton, then the ENTER, or press the number button to select the zoom point.

The screen is magnified. “ 1” appears briefly on the screen.

If necessary, press the 4, a, 5 or b button repeatedly to move the screen.

3.Press the SHIFT + 3 ZOOM buttons again. The screen is magnified more than “ 1”. “ 2” appears briefly.

4.Press the SHIFT + 3 ZOOM buttons to return to the original screen. Note:

Picture zoom may not work on some discs.

Viewing from a desired camera angle (Multi-Angle) [DVD]

Some DVD discs may contain scenes which have been shot simultaneously from a number of different camera angles. The jacket or case of discs that are recorded with angles will be marked.

Example:

3

Note: The recorded angles differ depending on the disc used.

1.Play the disc that is recorded with angles.

2.Press the SHIFT + 1 ANGLE buttons repeatedly until the desired angle appears.

Example:

3/5

Angle replay [DVD]

During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons. The unit skips back to last approximately 10 seconds, changes it to the next camera angle and plays it, and continues play. (If desired, press the buttons again.)

Repeat play

Press the REPEAT button during play of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode changes as follows.

TV screen		Display	Operation
[DVD]
	Chapter	REP. 1	Repeat of chapter being played
	Title	ALL REP.	Repeat of title being played
	Off		Repeat off mode
[VCD] [CD]
	1	REP. 1	Repeat of track being played
	All	ALL REP.	Repeat all tracks
	Off		Repeat off mode
During programmed play [VCD] [CD]
	Program 1	REP. 1	Repeat of track being played
	Program All	ALL REP.	Repeat all programmed tracks
	Off		Repeat off mode

Designated range repeat play (A-B Repeat)

1.Press the A-B REP button during play at the beginning of the section

you want to repeat (Point A). “ A-” appears on the screen. “REP. A-” appears and “A-” blinks on the display.

2.Press the A-B REP button again at the end of the section (Point B). “REP. A-B” remains lit on the display.

The section between points A and B is played repeatedly.

3.To return to normal play, press the A-B REP button again.

Note:

Repeat play or A-B repeat play mode may not work correctly with some discs.

Notes on using Video CD with PBC

To use the repeat play or A-B repeat play mode, select PBC off play mode as follows.

In the stop mode, press the number buttons to select the track number then press the a(Play) button.

Random play [CD]

1.Press the PROGRAM/RANDOM button once in the stop mode. “Random” appears on the screen and “RND” blinks on the display.

2.Press the a(Play) button to begin random play. “RND” remains lit. The

unit will automatically select tracks at random. Note:

The A-B REP and SEARCH MODE buttons do not work during random play.

15