Sanyo DC-TS760 instruction manual Sleep Timer Operation, Maintenance, Cleaning the unit

Models: DC-TS760

1 28
Download 28 pages 24.43 Kb
Page 25
Image 25
To search a preset station by PTY codes

To search a preset station by PTY codes

A particular programme type broadcast can be located by specifying the PTY codes.

1.Press the RDS button to select “PTY” while listening to an FM broadcast.

2.Press the TUNE/PTY “+” or “–” button within 2 seconds to select the desired PTY code. The PTY code changes as shown below;

NEWS vAFFAIRS vINFO vSPORT vEDUCATE vDRAMA v CULTURE vSCIENCE vVARIED vPOP M vROCK M vEASY M vLIGHT M vCLASSICS vOTHER M vWEATHER vFINANCE vCHILDREN vSOCIAL vRELIGION vPHONE IN vTRAVEL v LEISURE vJAZZ vCOUNTRY vNATION M vOLDIES vFOLK M vDOCUMENT v TEST vALARM

(or in the reverse sequence)

3.Press the PTY CHK (e) button within 10 seconds.

The unit searches 24 preset stations and stops when it finds a broadcast of the PTY code you have selected, then tunes into that station.

-To continue searching after the first stop, repeat steps 1 - 3 above.

-If no broadcast is found, the original station is heard.

To cancel searching, press the nbutton.

SLEEP TIMER OPERATION

The sleep timer automatically switches off the power after a preset time has elapsed. The volume will gradually be reduced (fade-out) during the 1-minute period before the unit turns off. There are 4 time periods available: 30, 60, 90 and 120 minutes.

Press the SHIFT + 6 SLEEP buttons repeatedly to select the desired sleep time. “SLEEP” and the selected time blink on the display. After several seconds, the original display returns and the brightness of the display reduces. “SLEEP” blinks.

To check the remaining sleep time

Press the SHIFT + 6 SLEEP buttons once. After several seconds, the original display returns.

To release the sleep timer while in operation

Press the SHIFT + 6 SLEEP buttons until “SLEEPOFF” appears. The timer is also released if the power is switched off.

MAINTENANCE

Cleaning the unit

Clean the outside of the unit with a clean soft cloth moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish of the surfaces.

24

Page 25
Image 25
Sanyo DC-TS760 Sleep Timer Operation, Maintenance, Cleaning the unit, To search a preset station by PTY codes