SDB Menu Operation—Picture

QuickTips

■If you don’t recognize words in the on-screen menu, change the menu option language or press the remote control RESET key twice (personalized settings will be reset to factory defaults).

Selecting the Menu Language

All menu Categories, Features, and Options will appear in the language you choose. English is the default language.

1.Use the / keys to highlight the Menu Language feature.

2.Press the right key.

3.Use the / keys to highlight a language option: English, Español, or Français. Press the ENTER key.

NOTE: The menu language does not affect the Captioning text

Figure 36—Menu Language

language.

■The CH MAP remote key will only operate the Sanyo Digital Box.

Need help?

Visit our Web site at

www.sanyoctv.com

System Information

This feature is designed for use by the factory and/or service personnel. The display is for diagnostic purposes only, there are no customer adjustments.

Figure 37—System Information

Channel Map

The SDB automatically displays the CHannel Map in columns regardless of the total number of channels. Rows will vary based on the number of channels received. If the CHannel Map page is longer than the screen display, simply use the cursor keys to scroll as needed. Also, this feature can be used as an express selection process to access channel numbers, see page 17.

The SDB Channel NightScan feature searches for new channels and adds them to the channel database. This operation will be performed at random intervals during in-active times. This feature automatically updates only DTV channels.

The CHannel Map display depends on the following conditions:

—If channel signals are not detected, the Map page for that category (DTV or NTSC) will be blank.

—The NTSC CHannel Map page will display either CATV channels or Off-Air channels but not both. During channel search, the SDB will scan both types. The SDB will automati- cally detect the proper type to be displayed and used for the NTSC database (for a maximum of 125 cable channels or a maximum of 68 VHF/UHF channels [VHF 2-13,

UHF 14-69]). (NTSC channels depend on the type of signal connected to the NTSC RF input.)

— When the CHannel Map is displayed on the screen, you can

Figure 39—DTV CH Map

press the TUNER key to switch between the categories.

 

— DTV channels will show only the major channel number.

 

16