Selecting a Major or Minor Channel using the (–) Sub CHannel Key

1.DTV Channels may be selected by entering only the major number. If a DTV minor channel is not entered after pressing the (–) Sub CHannel key, the SDB will automatically select the lowest minor channel, -01 or -1 for the DTV major channel entered. For example, if D34-_ _ is entered, the SDB will tune to DTV Channel 34-01.

QuickTips

■ Major channels can be

selected from the CH

Map page.

2.If any DTV minor channel number is entered as –00 or –0, the SDB will tune to the NTSC channel matching the major channel number. For example, if D24-00 is entered, the SDB will tune to Cable C24 or (UHF channel 24).

3.To select a major channel with a specific minor sub-channel: enter the major number, press (–) SUB CH key, and then enter the minor channel number.

4.Press ENTER to instantly select the minor channel or just wait for three seconds and the SDB will automatically select the minor channel.

Figure 48—Channel Entry for

Major Channel

■ Minor channels can be

selected only when the

(–) Sub CHannel key

is pressed; then the

Major channels

appears with a list

of available minor

channels.

■ If the RF out jack is

Operational Tips:

•If you are watching an NTSC channel and decide to change to a DTV channel. Simply press the

(–) SUB CH key, the DTV channel number entry (D__) display will appear. Enter the channel num- ber. Then press ENTER to instantly select the minor channel or just wait for three seconds and the SDB will automatically select the minor channel.

•If watching a DTV channel with the banner dis-played on the screen, and you press the (–) SUB CH key, the SDB will automatically remove the full banner (see Figure 49). The Brief Channel display will appear with sub channels listed (see Figure 50).

•If watching an NTSC channel with the banner dis- played on the screen, and you press the (–) SUB CH key, the SDB will automatically change the channel number entry area (D__) in the full banner display. A digital channel number may be entered.

Figure 49

Figure 50

 

 

 

 

Figure 51—Channel entry area (circled)

used, the signal will be

monaural.

■ Stereo is not available

through RF out; only

through A/V

connections.

Audio Reception

Audio options will depend on the channel tuning system selected and the current broadcaster’s signal received. The audio mode will display on screen for each selected choice, if available.

1.Press the AUDIO key, current setting will appear on screen.

2.To change setting, press the AUDIO key repeatedly until the desired option appears.

DTV options: Main, Sub-1, Sub-2, Sub-3, ...

NTSC options: Stereo, Mono, SAP For DTV—Main.

For NTSC—Stereo.

3.Press ENTER to instantly select the option.

NOTES:

•If audio selection is not available, the Audio mode will change to the SDB default modes.

•If you select SAP while watching an NTSC channel, the SDB will remain in the SAP audio mode until another option is selected. If SAP is not available, the audio mode defaults to Stereo.

Figure 52—DTV

Option: Main

Figure 53—NTSC

Option: Stereo

Need help?

Visit our Web site at

www.sanyoctv.com

•If you select Sub-1 while watching a DTV channel, the SDB will remain in the Sub-1 audio mode until another option is selected. If Sub-1 is not available, the audio mode defaults to Main.

19