USING THE AV1 AND S-VIDEO INPUT JACKSCONNECTING DVD PLAYER

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

1

2

Connect DVD Player or other

 

3

Press POWER to turn on the TV. Turn on

 

external equipment also.

equipment’s S-Video Out to

 

 

4

Press the INPUT key to select VIDEO1 or

the TV S-Video In Jack.

 

Using the S-Video jack over-

 

 

VIDEO2.

 

 

 

 

 

 

 

rides the Video (AV1) jack.

 

 

 

 

 

 

 

For external equipment without an S-Video

 

 

 

 

 

jack, refer to Step 1 on page 11 for AV

 

 

 

 

 

connections.

 

 

 

 

 

 

 

Connect DVD Player or other

 

 

 

 

 

 

 

 

 

 

What you will need for connections:

 

equipment’s Audio Out to the

 

 

 

 

TV Audio In Jacks.

 

 

 

 

 

 

 

 

 

 

• S-Video Cable – 1

 

 

 

 

 

 

 

 

 

 

 

DVD Player or

LCD TV BACK

 

• Audio Cable – 1

 

 

 

 

 

 

 

 

 

 

 

Video Game System

 

 

 

 

 

 

 

Remote Control

1 2

4 3

■Press the INPUT key after connecting cables to access the AV Inputs. There is NO need to tune to a blank channel.

■Make sure all cable connectors are fully seated on jacks.

■Analog equipment can be connected to either AV1 or AV2 input jacks.

■A solid Blue screen with the word VIDEO1 or VIDEO2, displayed means that the Video mode is selected, but no signal is being detected at the Video jacks. Check connections, turn on external equipment.

10 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032