Sanyo DP23845 USING THE REMOTE CONTROL, Key—, Key—, Menu, Key—, Mute, Key—, Key—, Key—, Input, Keys—, Power, Number, Cursor, Caption, V-Guide, Channel Scanning (CH

USING THE REMOTE CONTROL

➀Input Key—Press to select the program source to watch: TV signal or signal from a DVD Player or other equipment you have connected to the AV jacks.

➁Number Keys—Two keys must be pressed to select a channel. Example: Press 0 then 6 to select channel 6. For cable channels 100 through 125, press and hold the 1 key until C1– – appears. Then press the other two numbers.

➂Caption Key—(See page 17.)

➃Menu Key—Use this key with the Cursor ▲▼ and – + keys (see ➄) to navigate and adjust features of the on-screen menu system (see pages 14 ~ 16).

➄Channel Scanning (CH ▲▼) and Volume (VOL – +) Keys—Press to scan through the channels in memory and to adjust the volume.

➅Mute Key—Press once to minimize the volume. Press again to restore.

Note: When using the audio out jacks, this key will not mute the sound.

➆V-GuideKey—(See page 18 ~ 20.)

➇Power Key—Press to turn TV on or off.

	Points toward TV
		➠
➀
				➇
			➈
➁						➉
➂
➃							11
➄
➅							12
➆					13

■Be sure batteries are installed correctly.

■Point the remote control toward the TV. Objects between the remote control may cause misoperation of the remote control function.

■Cannot select channel with number keys. Press “0” in front of numbers 1~9. Example: Channel 05.

12 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032