PC CONNECTIONS
NOTE: Before connecting any cables, disconnect the AC Power Cords of both the HDTV and Personal Computer from the AC outlets.
1 Connect an RGB cable from the monitor output on your PC to the RGB connector on the HDTV and tighten the screws. (Monitor Cable not supplied).
2 Insert one end of a Stereo
HINT: Volume can be adjusted both from the PC and the HDTV VOLUME +, and - buttons.
3 Select Auto Adjustment from the PC Setup Menu.
NOTE: Power on the HDTV and any other peripheral equipment before powering on the computer.
PC MENU NAVIGATION MAP
PC MONITOR OPERATION
PC PREPARATION
To avoid a “No Support” condition, preset your PC’s output resolution to an XGA value, such as, 1024 x 768, before you disconnect it from your regular monitor.
PC MENU- AUTO ADJUSTMENTS OPERATION
1 Use the CURSOR Ÿ(UP) and ź(Down) buttons on the remote control to highlight the Auto Adjust in the PC menu mode. Press the OK button.
2 Highlight Auto Adjust and press the OK button to start the automatically adjust function.
PC MENU- MANUAL ADJUSTMENTS OPERATION
The Clock, Phase, Horizontal Position, and Vertical Position are set automatically when Auto Adjustment is completely done.
Clock- Adjust the Dot frequency to match the dot frequency of your computer.
Phase- Adjust the phase when the picture appears to flicker or blur.
1 Use the CURSOR Ÿ(UP) and ź(Down) buttons on the remote control to highlight
2 Use the CURSOR ŻŹ XWWRQVWR GMXVWWKH setting value. Press the MENU button to return.
3 Press the EXIT button on the remote control to exit the current menu.
PC MENU OPERATING TIPS
The Picture settings in the PC input do not affect other input settings.
English
13
