Sanyo DS32830H BASIC SET-UPAND CONNECTIONS, INITIAL SET-UP, Audio Output Jacks, 480p/480i/1080i Component Video In Jacks, (Component 3, Y, Pb, Pr–R/L)

BASIC SET-UP AND CONNECTIONS

QuickTips

■ The TV will automati-

cally select the correct

Antenna mode for the

type of RF signal you

connect.

■ TV will switch off

automatically after 15

INITIAL SET-UP

1.Install batteries in remote control, see page 7.

2.Connect signal, see below.

3.Plug in AC power cord.

4.Press POWER key to turn on TV.

5.Follow on-screen instructions.

CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE DISH

minutes if there is no

signal reception (cable

out or station not

broadcasting).

Exception—When the Video mode is selected, the TV will not automatically switch off when signal reception has stopped for 15 minutes.

■If you move the TV to a new location, press the RESET key twice after connecting the signal and turning on the TV.

Need help?Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

RECEIVER TO TV❶Cable ServiceNOTE: If you do not have a VCR connect signal directly to TV 75 ohm jack.S-Video Input Terminal

To enhance video detail use the S-Video AV1

and AV2 jacks instead of the Video jacks, if available on your external equipment.

(S-Video connections will override connections to the AV input jacks. See page 6.)

Audio Output Jacks

Connect external audio equipment here

(see page 6 ).

❶ Satellite Receiver		❶ RF Antenna
CATV IN
CH3
CH4	L- AUDIO -R IN FROM
VIDEO
OUT TO TV S-VIDEO	SAT.
VIDEO	L- AUDIO -R

	IN			VCR Back
	FROM ANT.
	OUT
	OUT TO TV				TV Back
		VIDEO	AUDIO	INPUT
		COMPONENT			AV2	AV1
			S-VIDEO
	Y				VIDEO
	AUDIO						UHF/VHF/CATV
OUTPUT			(MONO)
	P					(MONO) L	75Ω
L		b	L		L
R	P	r	R	R	AUDIO	R

CATV FRANCHISE NOTE: Cable companies, like public utilities, are franchised by local government authorities. To receive cable programs, even with equipment which is capable of receiving cable channels, the consumer must subscribe to the cable company’s service.

480p/480i/1080i Component Video In Jacks		Audio/Video Input Jacks (AV1 / AV2)
		Connect video equipment here (see
(Component 3, Y, Pb, Pr–R/L)
Connect digital video equipment here		pages 5 ~ 6).
(see page 5	).	Note: S-Video connections override the
		AV1 and AV2 video connections.

POSITIONING THE TV

Do not position the TV in a confined area. Allow space for normal air circulation around electronic parts.

4