Recording settings

C-2Setting series recording (continued)

2Display the <RECORDING CONDITIONS SET> screen as explained in "Displaying the recording settings screen" (P39).

MENU

<MAIN MENU>

 

2.RECORD SET

<RECORD SET>

3.RECORDING CONDITIONS SET

(J)(S)

 

<RECORDING CONDITIONS SET>

 

NORMAL RECORDING AREA

 

 

 

 

 

 

 

OVERWRITE

:

OFF

ALARM RECORDING AREA

 

 

 

OVERWRITE

:

OFF

REMAINING DISK WARNING

:

1%

SERIES RECORDING

:

OFF

AUTO DELETE

:

OFF

3Turn the S-dial to select "OVERWRITE" under NORMAL RECORDING AREA. Turn the J-dial to select "OFF", and then turn the S-dial clockwise.

Repeat the same procedure to set the OVERWRITE for the ALARM RECORDING AREA to "OFF".

4Turn the J-dial to select "SERIES RECORDING", and then turn the S-dial clockwise.

The cursor moves to "OFF".

5Turn the J-dial, select "ON", and turn the S-dial clockwise.

SERIES RECORDING

: ON

6Press the EXIT/OSD button to return to the menu.

7The series recording sets the following series recording. Press the EXIT/OSD button.

•Normal recording (P49)

•Timer-controlled recording (P51)

•Sets normal recording and combined alarm recording (P55, 56)

•Sets timer-controlled recording and combined alarm recording (P55, 56)

• Alarm recording cannot be used alone. Alarm recording must be used in combination with normal or timer-controlled recording.

•Normal recording and timer-controlled recording cannot be used simultaneously. If both are set at the same time, the timer-controlled recording will be disabled.

8Copy the setting contents of the menu to media such as CompactFlash card as explained in the "COPY MENU SETTINGS" section (P82).

9Copy the setting contents of the copied menu to DVR performing series recording (P82, 83).

The DVR connected for series recording will have the same menu settings.

C-3Series recording

1Start recording on the first DVR.

•Press the REC/STOP button if using normal recording or normal recording combined with alarm recording.

•Press the TIMER button if using timer-controlled recording or timer-controlled recording combined with alarm recording.

2If the normal or alarm recording area of the first DVR is insufficient, the recording will stop and it will automatically start on the hard disk of the next connected DVR.

3Stop the recording.

•Press the REC/STOP button for approximately 3 seconds if using normal recording or normal recording combined with alarm recording.

•Press the TIMER button if using timer-controlled recording or timer-controlled recording combined with alarm recording.

When series recording is used, the normal and the alarm recording areas will be automatically overwritten. Save important videos before recording.

Setting the storage period (AUTO C-4DELETE) for videos recorded in the

recording areas

The archive area is not subject to storage expiration; archived videos will not be erased. When the storage period expires, video stored in the normal and alarm recording areas will be automatically erased.

1Turn the J-dial to select "AUTO DELETE", and then turn the S-dial clockwise.

The cursor moves to "OFF".

2Turn the J-dial to select the storage period (example: 10), and then turn the S-dial clockwise.

 

 

<RECORDING CONDITIONS SET>

 

 

NORMAL RECORDING AREA

 

 

 

OVERWRITE

: ON

 

 

ALARM RECORDING AREA

 

(J)

(S)

OVERWRITE

: ON

 

 

 

 

REMAINING DISK WARNING

: **

 

 

SERIES RECORDING

: OFF

 

 

AUTO DELETE

: 10 DAYS

3Press the EXIT/OSD button to end the setting procedure.

EXIT/OSD

English

How to set 48