Recording Video from Other AV Equipment
Video output from video cameras and otherAV equipment can be recorded on the DVD recorder.
NOTE:
-Prepare other AV equipment in advance, and prepare the equipment for playback. ("Connecting to a video deck and other recording equip- ment" page 12)
-Only Audio input cannot be recorded without entering a Video signal.
-Almost all videos and DVD software on sale have
-Video games cannot be recorded.
1.Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.)
2.Press rOPEN/CLOSE to open the disc tray, and place the disc with the label facing up on the disc tray. Press rOPEN/CLOSE to close the disc tray.
3.When the disc menu is displayed for DVD+RW discs, either move to "Empty Title" using 8 or 2, or specify a position when overwriting an already recorded program.
NOTE:
-For details on how to specify the overwrite recording position, "Inserting New Recording on a DVD+RW" (See page 22).
4.Press REC MODE to specify the recording mode (picture quality).
5.Press CH/INPUT +or
AV2 
Current channel / selected input
08:13
21:00
6.Start playback on the other equipment.
7.Press the TV buttons to display the video from the other equipment on the TV screen.
8.Press RECq to start recording.
Inserting New Recordings on a DVD+RW
With DVD+RW discs, you can specify a video title already recorded to disc and overwrite that title. Note, however, that if you overwrite with content that is longer than the previously recorded content, other following content will also be overwritten.
1.Select the title on the disc menu.
2.Press the k button to play the title.
3.Find where you want to insert the new recording.
4.Press e at the position where the new recording to go.
5.Press REC MODE to select the record mode. Start recording as usual by pressing RECq on the remote control.
6.The "Title Overwrite" screen is displayed. Select "OK to Overwrite Title" and press the k button.
Title Overwrite
OK to Overwrite Title
Cancel
The new recording will be inserted.
7. Stop recording with e.
SAT Record (Automatic recording from Satellite Receiver)
In the case of equipment (e.g. satellite receiver) connected to theAV2 Scart terminal on the rear panel on which timer recording is possible, video can be recorded synchronized with the start of the broadcast without having to reserve recording on the DVD recorder.
NOTE:
-To use this feature, the "SAT Record" setting item for recording in System Menu must be set in advance.
-Press SYSTEM MENU to display the System Menu. Make sure that the "Recording" item is set to "AV2" using 8 or 2.
Video
Recording Options
Sound | Record Mode | SP |
|
|
| ||
Feature | Filter Mode | Standard |
|
Language | Auto chaptars | Off |
|
|
|
| |
Recording | SAT Record | AV2 | OK |
|
|
| |
| Dual Language | Language 1 |
|
Setup
If this item is not set, see “Recording Settings” on page 34.
Reserve recording on the AV equipment connected to the AV2 Scart terminal, and set the satellite tuner ready for recording.
22
