BEFORE OPERATION
Common Operation
q FUNCTION (Open/Close)
Turning the power on and off
Press [z/ON] to turn the power on.
•“HELLO” appears briefly on the FL display.
(After connecting the power cord, when you press [z/ON] for the first time, the
When the power cord is connected to the AC outlet, the unit will respond to commands from the remote control.
To turn the power off, press [z/ON] again.
•
Smart start function
If the following buttons are pressed when the power is turned off, the unit turns on automatically and the selected source is activated.
[q], [a] (Front panel of the unit)
[OPEN/CLOSE], [a], [TUNE/BAND] (Remote control)
Selecting the source
Press [FUNCTION] to select the desired source. Each time the button is pressed, the display changes as follows:
DVD/CD
z/ON
MUTE 
BASS
– VOLUME +
aVOLUME z/ON
(Play)
OPEN/CLOSE
TUNE/BAND
FUNCTION
SOUND
4
5
a
(Play)
VIDEO 1
VIDEO 2
FM TUNER
AM TUNER
•When the source selection is changed, disc playback automatically stops.
Adjusting the volume
Rotate [VOLUME] (or press [VOLUME] + or - on the remote control). The volume level appears on the FL display (VOL 0 ~ VOL MAX).
To reduce the volume temporarily (muting)
Press [MUTE] on the remote control. “MUTE” blinks on the FL display.
To restore the previous volume setting, press [MUTE] again.
Selecting the sound mode
1.Press [SOUND] repeatedly to select the desired sound mode (“BASS”, “TREBLE”, “CINE (Cinema)” or “QS
2.Press the button as desired.
Sound mode | Press | Display change |
BASS | o or p | “+5” ~ |
TREBLE | o or p | “+5” ~ |
|
|
|
CINE | ENTER | “ON” or “OFF” |
QS | ENTER | “LOW” or “HI” |
Note for “CINE”:
When enjoying a DVD disc with the volume set low at night, select this mode. It enhances spoken lines making speech clearer.
3.Repeat steps 1 to 2 for another sound mode.
4.Press [SOUND] repeatedly to close the display.
Bass boost system
Press [BASS] repeatedly to select the desired bass boost effect. BOOST v BASS OFF v NORMAL v BOOST . . .
