Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
• “Random” appears on the TV screen.
• “RND” blinks on the FL display.
1
2. Press [a] to begin random playback.
•“RND” remains lit on the FL display.
The unit will automatically select tracks at random.
Notes:
• To stop random playback, press [n].2
• The
Programmed Playback [CD]
Up to 20 selections can be programmed. | 1 |
Programming procedure | 2 |
1. Press [PROGRAM/RANDOM] twice in the stop mode. | |
• “Program Mode” screen appears on the TV screen. |
|
• “PGM” blinks on the FL display. |
|
2. Press the number buttons to select the track number. |
|
Example: |
|
To select Track No.3, press [0], then [3]. |
|
To select Track No.10, press [1], then [0]. |
|
To select Track No.24, press [2], then [4]. | 3 |
Notes: |
|
• | If you make a mistake, press [CLEAR]. | 5 |
| ||
• | To quit the “Program Mode” screen, press [PROGRAM/ |
|
| RANDOM]. |
|
n(Stop)
CLEAR
3.Press [p] to move the highlighted box down. Example:
Program Mode |
|
|
|
| |||
All Clear |
|
|
|
|
| ||
1 | 03 | 6 | 11 | 16 | |||
2 |
| 7 | 12 | 17 | |||
3 | 8 | 13 | 18 | ||||
4 | 9 | 14 | 19 | ||||
5 | 10 | 15 | 20 |
4.Repeat steps 2 and 3 as above to select another track.
5.Press [a] to start playback.
• “PGM” remains lit on the FL display.
When all programmed selections have played, the unit stops automatically.
•The program contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM] twice to call up the “Program Mode” screen, then press [a].
To clear the program one by one
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] or [5] to select the track number.
3.Press [CLEAR].
To clear all the programs
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] to select “All Clear”.
3.Press [ENTER].
To change the program
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] or [5] to select the track number.
3.Press the number buttons to select the track number to be replaced.
Note:
To quit the “Program Mode” screen, press [PROGRAM/ RANDOM].